The Padiator is a rear brake cooler that removes the heat from the caliper, rotor and brake pads.  It is designed to easily install between the brake pad and the caliper piston. 
    The Padiator had been found to reduce the heat generated by over 100 degrees F and has increased brake life by as much a 3 times.  By removing the heat the Padiator stops brake squeaking, brake fluid boiling and rotor warping.
    Currently available for late model KTMs and soon to be available for late model Hondas pending current field testing.

    The Springythingy is a way to let the spring turn radial during spring compression. It improves the suspension by eliminating spring bind which maintains the spring rate.  The Springything is available for all White Power suspension and the rear of Asian motorcycles

- Improve rider input – direction, precise
- Smooth out harsh hits (rocks, ruts, sharp edges)
- Reduces riding fatigue
- Enhances any suspension updates already performed
- Minimal suspension resetting
- Creates a happy suspension
* Guaranteed to produce an improvement in the way your bike rides

The Wobble axle replaces the front axle for of 03 and up KTMs that allows the rider to change the trail of the front wheel +/- 2mm. The rider tunes the handling characteristics by turning the axle in the lower forks to optimize personal rider handling preference
    The Wobble Axle works similar to offset triple clamps with the option to go from 18mm - 22mm offset with the turn of the axle. This can be done on the trail with a standard tool kit in a matter of minutes.
    The Wobble Axle is machined from a solid billet of 7075 ultra high strength aircraft aluminum which has it weighing in at .90 lbs with the bushings and axle being black hard anodized.
    This axle installs by removing the stock axle and inserting the wobble axle with the bushing and aligning it to the desired position and securing in the normal axle installation manner. Adjusting or re-setting the offset is done by rotating it into the desired position